Use a 2 X 6 as a ramp.
The higher the hitch the
longer you want the ramp.











Drive or Push
The motorcycle up the ramp
Clamp the front tire
Using a ratchet clamp.
Remove the ramp
If you have a solid front wheel
Run the strap from axle to
axle.








Then use two straps to secure
the bike to the tow vehicle.
Connect from the ends of the
bumper (the further out the
better)
to the front end. (handlebar or
tree)










Crank the straps so they
collapse the front tubes about
half way.
Make sure the bike is plumb.










There will be some lean when
turning.
Every bike is different due to
the rake angle of the front end.
Place the bike in neutral and
put the kickstand up.
To start using the
Handi-Hauler first place the hauler
into your receiver.

Don’t forget the locking pin.
This is a picture of one of the older models